Santa Clarita, CA — Grading Permit Bond
Santa Clarita's published grading-security chapter concerns hazards from unfinished grading and completion of approved work. The City Engineer determines security requirements; this is not automatically a fixed bond for every grading job.
Continue to our secure checkout partner, Propeller (opens in a new tab).
- Recorded state
- California
- Bond type
- Building / Excavation / Grading Permit Bond
- Category
- Contractors & construction
What this bond does
The published section 17.84.010 describes security for mitigating flood/geotechnical hazards created if grading is unfinished and for work needed to bring the property into code compliance. It can include incidental grading on contiguous off-site property when that owner's written consent is filed with the City Engineer.
- Who needs it
- The permittee or property owner whom the City Engineer requires to provide security. The published chapter allows security requirements for grading over 1,000 cubic yards and, for unusual conditions/special hazards, smaller work; it also describes discretionary waivers. Get the actual project determination rather than assuming either a universal mandate or a small-job exemption.
- Who it protects
- The chapter permits a California-authorized corporate surety bond and other security with prior written Engineer approval, and allows a cash portion for safeguards. Its valuation considers the greater excavation/fill volume and drainage, protective and hazard-removal work estimated by the Engineer. A bond does not automatically replace every separate cash requirement, and these rules do not describe a general contractor license or liability policy.
Your bond option
This is the option on record for this bond.
- Bond optionPurchase Now (opens in a new tab)Continue to our secure checkout partner, Propeller (opens in a new tab).
The bond amount describes the limit of the bond obligation, not the price. A listed amount does not establish what the requesting party requires. The premium is what you pay and must be confirmed for the actual option. An E&O limit, where listed, is separate errors and omissions insurance.
Sources
- Santa Clarita — Published Grading Division, Chapter 17.84 Security (opens in a new tab)Checked October 23, 2026
Have these ready
- Have the Santa Clarita grading permit, approved plans and actual Engineer security determination.
- Identify the required permittee/owner principal, precise recipient/form and any contiguous-owner consent.
- Obtain the Engineer's required sum, accepted security/issuer, cash-portion instructions and dates.
- Prepare authorized execution/filing and written completion, reduction and release directions.
Questions about this bond
Does a job under 1,000 cubic yards automatically avoid security?
The published chapter allows the Engineer to require it for unusual conditions or special hazards below that volume. Obtain the actual project decision and current instructions.
Is rough-grading completion an automatic bond release?
No. The published chapter describes discretionary reductions after conforming rough grading, while its term runs until permit work is completed and Engineer-approved.
How do I apply for the grading bond?
Purchase Now opens Propeller in a new tab. Match the Santa Clarita request, required permittee/owner, exact accepted recipient/form, Engineer-set sum and dates. Provider review/issuance, execution and filing do not themselves issue the permit, approve grading or release security.